task(1)

NAME
task - A command line todo manager.

SYNOPSIS
task <filter> <command> [ <mods> | <args> ]
task --version

DESCRIPTION
Taskwarrior is a command line todo list manager. It maintains a list of tasks that you want to do, allowing you to add/remove, and otherwise manipulate them. Taskwarrior has a rich set of subcommands that allow you to do various things with it. At the core, taskwarrior is a list processing program. You add text and additional related parameters and redisplay the information in a nice way. It turns into a todo list program when you add due dates and recurrence. It turns into an organized todo list program when you add priorities, tags (one word descriptors), project groups, etc.

FILTER
The <filter> consists of zero or more search criteria that select tasks. For example, to list all pending tasks belonging to the 'Home' project:
  task project:Home list You can specify multiple filter terms, each of which further restricts the result:
  task project:Home +weekend garden list This example applies three filters: the 'Home' project, the 'weekend' tag, and the description or annotations must contain the character sequence 'garden'. In this example, 'garden' is translated internally to:
  description.contains:garden as a convenient shortcut. The 'contains' here is an attribute modifier, which is used to exert more control over the filter than simply absence or presence. See the section 'ATTRIBUTE MODIFIERS' below for a complete list of modifiers. Note that a filter may have zero terms, which means that all tasks apply to the command. This can be dangerous, and this special case is confirmed, and cannot be overridden. For example, this command:
  task modify +work
  This command has no filter, and will modify all tasks. Are you sure? (yes/no) will add the 'work' tag to all tasks, but only after confirmation. More filter examples:
  task <command> <mods>
  task 28 <command> <mods>
  task +weekend <command> <mods>
  task project:Home due.before:today <command> <mods>
  task ebeeab00-ccf8-464b-8b58-f7f2d606edfb <command> <mods> By default filter elements are combined with an implicit 'and' operator, but 'or' and 'xor' may also be used, provided parentheses are included:
  task '( /[Cc]at|[Dd]og/ or /[0-9]+/ )' <command> <mods> The parentheses isolate the logical term from any default command filter or implicit report filter which would be combined with an implicit 'and'. A filter may target specific tasks using ID or UUID numbers. To specify multiple tasks use one of these forms (comma or space-separated list of ID numbers, UUID numbers or ID ranges):
  task 1,2,3 delete
  task 1-3 info
  task 1,2-5,19 modify pri:H
  task 4-7 ebeeab00-ccf8-464b-8b58-f7f2d606edfb info

MODIFICATIONS
The <mods> consist of zero or more changes to apply to the selected tasks, such as:
  task <filter> <command> project:Home
  task <filter> <command> +weekend +garden due:tomorrow
  task <filter> <command> Description/annotation text
  task <filter> <command> /from/to/

SUBCOMMANDS
Taskwarrior supports different kinds of commands. There are read commands, write commands, miscellaneous commands and script helper commands. Read commands do not allow modification of tasks. Write commands can alter almost any aspect of a task. Script helper commands are provided to help you write add-on scripts, for example, shell completion (only minimal output is generated, as with verbose=nothing).

READ SUBCOMMANDS
Reports are read subcommands. There are several reports currently predefined in taskwarrior. The output and sort behavior of these reports can be configured in the configuration file. See also the man page taskrc(5). There are also other read subcommands that are not reports.

task --version
    This is the only conventional command line argument that Taskwarrior supports, and is intended for add-on scripts to verify the version number of an installed Taskwarrior without invoking the mechanisms that create default files.

task <filter>
    With no command specified, the default command is run, and the filter applied.

task <filter> active
    Shows all tasks matching the filter that are started but not completed.

task <filter> all
    Shows all tasks matching the filter, including parents of recurring tasks.

task <filter> blocked
    Shows all tasks matching the filter, that are currently blocked by other tasks.

task <filter> blocking
    Shows all tasks matching the filter, that block other tasks.

task <filter> burndown.daily
    Shows a graphical burndown chart, by day.

task <filter> burndown.weekly
    Shows a graphical burndown chart, by week. Note that 'burndown' is an alias to the 'burndown.weekly' report.

task <filter> burndown.monthly
    Shows a graphical burndown chart, by month.

task calendar [due|<month> <year>|<year>] [y]
    Shows a monthly calendar with due tasks marked. Shows one horizontal line of months. If the 'y' argument is provided, will show at least one complete year. If a year is provided, such as '2014', then that full year is shown. If both a month and a year are specified ('6 2014') then the months displayed begin at the specified month and year. If the 'due' argument is provided, will show the starting month of the earliest due task.

task colors [sample | legend]
    Displays all possible colors, a named sample, or a legend containing all currently defined colors.

task columns [substring]
    Displays all supported columns and formatting styles. Useful when creating custom reports. If a substring is provided, only matching column names are shown.

task <filter> completed
    Shows all tasks matching the filter that are completed.

task <filter> count
    Displays only a count of tasks matching the filter.

task <filter> export
    Exports all tasks in the JSON format. Redirect the output to a file, if you wish to save it, or pipe it to another command or script to convert it to another format. The standard task release comes with a few example scripts, such as:
      export-csv.pl
      export-sql.py
      export-xml.py
      export-yaml.pl
      export-html.pl
      export-tsv.pl
      export-xml.rb
      export-ical.pl
      export-xml.pl
      export-yad.pl

task <filter> ghistory.annual
    Shows a graphical report of task status by year.

task <filter> ghistory.monthly
    Shows a graphical report of task status by month. Note that 'ghistory' is an alias to 'ghistory.monthly'.

task help
    Shows the long usage text.

task <filter> history.annual
    Shows a report of task history by year.

task <filter> history.monthly
    Shows a report of task history by month. Note that 'history' is an alias to 'history.monthly'.

task <filter> ids
    Applies the filter then extracts only the task IDs and presents them as a range, for example: 1-4,12. This is useful as input to a task command, to achieve this:
      task $(task project:Home ids) modify priority:H This example first gets the IDs for the project:Home filter, then sets the priority to H for each of those tasks. This can also be achieved directly:
      task project:Home modify priority:H This command is mainly of use to external scripts.

task <filter> uuids
    Applies the filter on all tasks (even deleted and completed tasks) then extracts only the task UUIDs and presents them as a comma-separated list. This is useful as input to a task command, to achieve this:
      task $(task project:Home status:completed uuids) modify status:pending This example first gets the UUIDs for the project:Home and status:completed filters, then makes each of those tasks pending again. This command is mainly of use to external scripts.

task udas
    Shows a list of UDAs that are defined, including their name, type, label and allowed values. Also shows UDA usage and any orphan UDAs.

task <filter> information
    Shows all data and metadata for the specified tasks. This is the only means of displaying all aspects of a given task, including the change history.

task <filter> list
    Provides a standard listing of tasks matching the filter.

task <filter> long
    Provides the most detailed listing of tasks matching the filter.

task <filter> ls
    Provides a short listing of tasks matching the filter.

task <filter> minimal
    Provides a minimal listing of tasks matching the filter.

task <filter> newest
    Shows the newest tasks matching the filter.

task <filter> next
    Shows a page of the most urgent tasks, sorted by urgency, which is a calculated value.

task <filter> ready
    Shows a page of the most urgent ready tasks, sorted by urgency. A ready task is one that is either unscheduled, or has a scheduled date that is past and has no wait date.

task <filter> oldest
    Shows the oldest tasks matching the filter.

task <filter> overdue
    Shows all incomplete tasks matching the filter that are beyond their due date.

task <filter> projects
    Lists all project names that are currently used by pending tasks, and the number of tasks for each.

task <filter> recurring
    Shows all recurring tasks matching the filter.

task <filter> unblocked
    Shows all tasks that are not currently blocked by other tasks, matching the filter.

task <filter> waiting
    Shows all waiting tasks matching the filter.

WRITE SUBCOMMANDS

task add <mods>
    Adds a new pending task to the task list.

task <filter> annotate <mods>
    Adds an annotation to an existing task.

task <filter> append <mods>
    Appends description text to an existing task.

task <filter> delete <mods>
    Deletes the specified task from task list.

task <filter> denotate <mods>
    Deletes an annotation for the specified task. If the provided description matches an annotation exactly, the corresponding annotation is deleted. If the provided description matches annotations partly, the first partly matched annotation is deleted.

task <filter> done <mods>
    Marks the specified task as done.

task <filter> duplicate <mods>
    Duplicates the specified task and allows modifications.

task <filter> edit
    Launches a text editor to let you modify all aspects of a task directly. In general, this is not the recommended method of modifying tasks, but is provided for exceptional circumstances. Use carefully.

task import <file> [<file> ...]
    Imports tasks in the JSON format. The standard task release comes with a few example scripts, such as:
      import-todo.sh.pl
      import-yaml.pl

task log <mods>
    Adds a new task that is already completed, to the task list.

task <filter> modify <mods>
    Modifies the existing task with provided information.

task <filter> prepend <mods>
    Prepends description text to an existing task.

task <filter> start <mods>
    Marks the specified tasks as started.

task <filter> stop <mods>
    Removes the start time from the specified task.

MISCELLANEOUS SUBCOMMANDS
Miscellaneous subcommands either accept no command line arguments, or accept non-standard arguments.

task config [name [value | '']]
    Add, modify and remove settings directly in the taskwarrior configuration. This command either modifies the 'name' setting with a new value of 'value', or adds a new entry that is equivalent to 'name=value':
        task config name value This command sets a blank value. This has the effect of suppressing any default value:
        task config name '' Finally, this command removes any 'name=...' entry from the .taskrc file:
        task config name

task diagnostics
    Shows diagnostic information, of the kind needed when reporting a problem. When you report a bug, it is likely that the platform, version, and environment are important. Running this command generates a summary of similar information that should accompany a bug report. It includes compiler, library and software information. It does not include any personal information, other than the location and size of your task data files. This command also performs a diagnostic scan of your data files looking for common problems, such as duplicate UUIDs.

task execute <external command>
    Executes the specified command. Not useful by itself, but when used in conjunction with aliases and extensions can provide seamless integration.

task logo
    Displays the Taskwarrior logo.

task reports
    Lists all supported reports. This includes the built-in reports, and any custom reports you have defined.

task show [all | substring]
    Shows all the current settings. If a substring is specified just the settings containing that substring will be displayed.

task <filter> stats
    Shows statistics of the tasks defined by the filter.

task <filter> summary
    Shows a report of aggregated task status by project.

task <filter> tags
    Show a list of all tags used. Any special tags used are highlighted. Note that virtual tags are not listed - they don't really exist, and are just a convenient notation for other task metadata.

task timesheet [weeks]
    Shows a weekly report of tasks completed and started.

task undo
    Reverts the most recent action. Obeys the confirmation setting.

task version
    Shows the taskwarrior version number.

HELPER SUBCOMMANDS

task _aliases
    Generates a list of all aliases, for autocompletion purposes.

task _columns
    Displays only a list of supported columns.

task _commands
    Generates a list of all commands, for autocompletion purposes.

task _config
    Lists all supported configuration variables, for completion purposes.

task <filter> _ids
    Shows only the IDs of matching tasks, in the form of a list.

task _show
    Shows the combined defaults and overrides of the configuration settings, for use by third-party applications.

task <filter> _uuids
    Shows only the UUIDs of matching tasks among all tasks (even deleted and completed tasks), in the form of a list.

task _udas
    Shows only defined UDA names, in the form of a list.

task <filter> _projects
    Shows only a list of all project names used.

task <filter> _tags
    Shows only a list of all tags used, for autocompletion purposes.

task <filter> _urgency
    Displays the urgency measure of a task.

task _version
    Shows only the taskwarrior version number.

task _zshcommands
    Generates a list of all commands, for zsh autocompletion purposes.

task <filter> _zshids
    Shows the IDs and descriptions of matching tasks.

task <filter> _zshuuids
    Shows the UUIDs and descriptions of matching tasks.

task _get <DOM> [<DOM> ...]
    Accesses and displays the DOM reference(s). Used to extract individual values from tasks, or the system. Supported DOM references are:
      rc.<name>
      context.program
      context.args
      context.width
      context.height
      system.version
      system.os
      <id>.<attribute>
      <uuid>.<attribute> Note that the 'rc.<name>' reference may need to be escaped using '--' to prevent the reference from being interpreted as an override. Note that if the DOM reference is not valid, or the reference evaluates to a missing value, the command exits with 1.

ATTRIBUTES AND METADATA

ID  Tasks can be specified uniquely by IDs, which are simply the indexes of the tasks in the data file. The ID of a task may therefore change, but only when a command is run that displays IDs. When modifying tasks, it is safe to rely on the last displayed ID. Always run a report to check you have the right ID for a task. IDs can be given to task as a sequence, for example,
    task 1,4-10,19 delete

+tag|-tag
    Tags are arbitrary words associated with a task. Use + to add a tag and - to remove a tag from a task. A task can have any quantity of tags. Certain tags (called 'special tags'), can be used to affect the way tasks are treated. For example, if a task has the special tag 'nocolor', then it is exempt from all color rules. The supported special tags are:
        +nocolor Disable color rules processing for this task
        +nonag Completion of this task suppresses all nag messages
        +nocal This task will not appear on the calendar
        +next Elevates task so it appears on 'next' report There are also virtual tags, which represent task metadata in tag form. These tags do not exist, but can be used to filter tasks. The supported virtual tags are:
        BLOCKED Matches if the task is blocked
        UNBLOCKED Matches if the task is not blocked
        BLOCKING Matches if the task is blocking
        YESTERDAY Matches if the task was due sometime yesterday
        DUE Matches if the task is due
        DUETODAY Matches if the task is due today
        TODAY Matches if the task is due today
        TOMORROW Matches if the task is due sometime tomorrow
        WEEK Matches if the task is due this week
        MONTH Matches if the task is due this month
        YEAR Matches if the task is due this year
        OVERDUE Matches if the task is overdue
        ACTIVE Matches if the task is started
        SCHEDULED Matches if the task is scheduled
        READY Matches if the task is actionable
        PARENT Matches if the task is a parent
        CHILD Matches if the task has a parent
        UNTIL Matches if the task expires
        WAITING Matches if the task is waiting
        ANNOTATED Matches if the task has annotations
        TAGGED Matches if the task has tags
        PENDING Matches if the task has pending status
        COMPLETED Matches if the task has completed status
        DELETED Matches if the task has deleted status You can use +BLOCKED to filter blocked tasks, or -BLOCKED for unblocked tasks. Similarly, -BLOCKED is equivalent to +UNBLOCKED.

project:<project-name>
    Specifies the project to which a task is related to.

priority:H|M|L or priority:
    Specifies High, Medium, Low and no priority for a task.

due:<due-date>
    Specifies the due-date of a task.

recur:<frequency>
    Specifies the frequency of a recurrence of a task.

scheduled:<ready-date>
    Specifies the date after which a task can be accomplished.

until:<expiration date of task>
    Specifies the expiration date of a task, after which it will be deleted.

limit:<number-of-rows>
    Specifies the desired number of tasks a report should show, if a positive integer is given. The value 'page' may also be used, and will limit the report output to as many lines of text as will fit on screen. This defaults to 25 lines.

wait:<wait-date>
    Date until task becomes pending.

depends:<id1,id2 ...>
    Declares this task to be dependent on id1 and id2. This means that the tasks id1 and id2 should be completed before this task. Consequently, this task will then show up on the 'blocked' report. It accepts a comma-separated list of ID numbers, UUID numbers and ID ranges. When prefixing any element of this list by '-', the specified tasks are removed from the dependency list.

entry:<entry-date>
    For report purposes, specifies the date that a task was created.

ATTRIBUTE MODIFIERS
Attribute modifiers improve filters. Supported modifiers are:
    before (synonyms under, below)
    after (synonyms over, above)
    none
    any
    is (synonym equals)
    isnt (synonym not)
    has (synonym contains)
    hasnt
    startswith (synonym left)
    endswith (synonym right)
    word
    noword
For example:
    task due.before:eom priority.not:L list
The before modifier is used to compare values, preserving semantics, so project.before:B list all projects that begin with 'A'. Priority 'L' is before 'M', and due:2011-01-01 is before due:2011-01-02. The synonyms 'under' and 'below' are included to allow filters that read more naturally. The after modifier is the inverse of the before modifier. The none modifier requires that the attribute does not have a value. For example:
    task priority: list
    task priority.none: list are equivalent, and list tasks that do not have a priority. The any modifier requires that the attribute has a value, but any value will suffice. The is modifier requires an exact match with the value. The isnt modifier is the inverse of the is modifier. The has modifier is used to search for a substring, such as:
    task description.has:foo list
    task foo list These are equivalent and will return any task that has 'foo' in the description or annotations. The hasnt modifier is the inverse of the has modifier. The startswith modifier matches against the left, or beginning of an attribute, such that:
    task project.startswith:H list
    task project:H list are equivalent and will match any project starting with 'H'. Matching all projects not starting with 'H' is done with:
    task project.not:H list The endswith modifier matches against the right, or end of an attribute. The word modifier requires that the attribute contain the whole word specified, such that this:
    task description.word:bar list Will match the description 'foo bar baz' but does not match 'dog food'. The noword modifier is the inverse of the word modifier.

EXPRESSIONS AND OPERATORS
You can use the following operators in filter expressions:
  and or xor Logical operators
  < <= = != >= > Relational operators
  ( ) Precedence For example:
  task due.before:eom priority.not:L list
  task '( due < eom or priority != L )' list Note that the parentheses are required when using a logical operator other than the 'and' operator. The reason is that some reports contain filters that must be combined with the command line. Consider this example:
  task project:Home or project:Garden list While this looks correct, it is not. The 'list' report contains a filter of:
  task show report.list.filter
  Config Variable Value
  ----------------- --------------
  report.list.filter status:pending Which means the example is really:
  task status:pending project:Home or project:Garden list The implied 'and' operator makes it:
  task status:pending and project:Home or project:Garden list This is a precedence error - the 'and' and 'or' need to be grouped using parentheses, like this:
  task status:pending and ( project:Home or project:Garden ) list The original example therefore must be entered as:
  task '( project:Home or project:Garden )' list This includes quotes to escape the parentheses, so that the shell doesn't interpret them and hide them from taskwarrior. There is redundancy between operators, attribute modifiers and other syntactic sugar. For example, the following are all equivalent:
  task foo list
  task /foo/ list
  task description.contains:foo list
  task description.has:foo list
  task 'description ~ foo' list

SPECIFYING DATES AND FREQUENCIES

  DATES
Taskwarrior reads dates from the command line and displays dates in the reports. The expected and desired date format is determined by the configuration variable dateformat

    Exact specification
        task ... due:7/14/2008

    ISO-8601
        task ... due:20130314T223000Z

    Relative wording
        task ... due:now
        task ... due:today
        task ... due:yesterday
        task ... due:tomorrow

    Day number with ordinal
        task ... due:23rd
        task ... due:3wks
        task ... due:1day
        task ... due:9hrs

    Start of next (work) week (Monday), calendar week (Sunday or Monday), month, quarter and year
        task ... due:sow
        task ... due:soww
        task ... due:socw
        task ... due:som
        task ... due:soq
        task ... due:soy

    End of current (work) week (Friday), calendar week (Saturday or Sunday), month, quarter and year
        task ... due:eow
        task ... due:eoww
        task ... due:eocw
        task ... due:eom
        task ... due:eoq
        task ... due:eoy

    At some point or later
        task ... wait:later
        task ... wait:someday This sets the wait date to 1/18/2038.

    Next occurring weekday
        task ... due:fri

    Predictable holidays
        task ... due:goodfriday
        task ... due:easter
        task ... due:eastermonday
        task ... due:ascension
        task ... due:pentecost
        task ... due:midsommar
        task ... due:midsommarafton

  FREQUENCIES
Recurrence periods. Taskwarrior supports several ways of specifying the frequency of recurring tasks.

    daily, day, 1da, 2da, ...
        Every day or a number of days.

    weekdays
        Mondays, Tuesdays, Wednesdays, Thursdays, Fridays and skipping weekend days.

    weekly, 1wk, 2wks, ...
        Every week or a number of weeks.

    biweekly, fortnight
        Every two weeks.

    monthly, month, 1mo, 2mo, ...
        Every month.

    quarterly, 1qtr, 2qtrs, ...
        Every three months, a quarter, or a number of quarters.

    semiannual
        Every six months.

    annual, yearly, 1yr, 2yrs, ...
        Every year or a number of years.

    biannual, biyearly, 2yr
        Every two years.

COMMAND ABBREVIATION
All taskwarrior commands may be abbreviated as long as a unique prefix is used, for example:
    $ task li
is an unambiguous abbreviation for
    $ task list
but
    $ task l
could be list, ls or long. Note that you can restrict the minimum abbreviation size using the configuration setting:
    abbreviation.minimum=3

SPECIFYING DESCRIPTIONS
Some task descriptions need to be escaped because of the shell and the special meaning of some characters to the shell. This can be done either by adding quotes to the description or escaping the special character:
    $ task add "quoted ' quote"
    $ task add escaped \' quote
The argument -- (a double dash) tells taskwarrior to treat all other args as description:
    $ task add -- project:Home needs scheduling
In other situations, the shell sees spaces and breaks up arguments. For example, this command:
    $ task 123 modify /from this/to that/
is broken up into several arguments, which is corrected with quotes:
    $ task 123 modify "/from this/to that/"
It is sometimes necessary to force the shell to pass quotes to Taskwarrior intact, so you can use:
    $ task add project:\'Three Word Project\' description

CONFIGURATION FILE AND OVERRIDE OPTIONS
Taskwarrior stores its configuration in a file in the user's home directory: ~/.taskrc. The default configuration file can be overridden with:

task rc:<path-to-alternate-file> ...
    Specifies an alternate configuration file.

TASKRC=/tmp/.taskrc task ..
    The environment variable overrides the default and the command line specification of the .taskrc file.

task rc.<name>:<value> ...
    task rc.<name>=<value> ... Specifies individual configuration file overrides.

TASKDATA=/tmp/.task task ...
    The environment variable overrides the default, the command line, and the 'data.location' configuration setting of the task data directory.

MORE EXAMPLES
For examples please see the online documentation starting at
    <http://taskwarrior.org/projects/taskwarrior/wiki>
Note that the online documentation is more detailed and more current than this man page.

FILES

~/.taskrc
    User configuration file - see also taskrc(5). Note that this can be overridden on the command line or by the TASKRC environment variable.

~/.task
    The default directory where task stores its data files. The location can be configured in the configuration variable 'data.location', or overridden with the TASKDATA environment variable..

~/.task/pending.data
    The file that contains the tasks that are not yet done.

~/.task/completed.data
    The file that contains the completed ("done") tasks.

~/.task/undo.data
    The file that contains information needed by the "undo" command.

CREDITS & COPYRIGHTS
Copyright (C) 2006 - 2014 P. Beckingham, F. Hernandez. Taskwarrior is distributed under the MIT license. See http://www.opensource.org/licenses/mit-license.php for more information.

SEE ALSO
tasksh(1), taskrc(5), task-color(5), task-sync(5) For more information regarding taskwarrior, see the following:

The official site at
    <http://taskwarrior.org>

The official code repository at
    <https://git.tasktools.org/scm/tm/task.git>

You can contact the project by emailing
    <support@taskwarrior.org>

REPORTING BUGS

Bugs in taskwarrior may be reported to the issue-tracker at
    <http://taskwarrior.org>